Thread Depth Indicator
Step 1. Insert the thread depth indicator (supplied) through the thread inserts found on the back of the flat panel to make sure the inserts measure the same full depth and mark it.
Step 2. Locate the correct diameter screw for the thread insert. Compare your marking to the screws (supplied). Step 3. If your selected screw is longer than the marking on the thread depth indicator, DO NOT USE this screw.
Step 4. The screw length must not bypass the marking. Select another screw size, until you find one that comes closest to your mark without going past.
When using the universal spacers (please see Universal Spacers Installation) in the installation, make sure to account for the appropriate spacing depth with the thread depth indicator. The universal spacers will affect the overall thread depth of the mounting hardware that is to be used.
|
|
| Inverted Flat |
|
|
| Panel Display |
|
|
| Marking the |
|
|
| Depth |
|
|
| Threaded Insert |
|
|
| Thread Depth |
|
|
| Indicator |
|
| Figure 1 |
|
Screw | Marking | Screw | Marking |
|
|
| |
Thread Depth | Thread Depth | ||
Indicator | Indicator |
Figure 2 | Figure 3 |
|
Universal Spacers Installation
If your display has uneven mounting points, or recessed mounting points, please use the provided universal spacers.
The universal spacer may be stacked five (5) high, for a total stacking height of
The universal spacer can fit M4, M5, M6 and M8 screws sizes.
Page - 5 - | Installation Manual |