PRC
PRC Installation
1.Screw the
2.Secure the coupling with the M6 set screw (supplied).
Display Installation
1.Place the display on a soft flat surface, face down.
2.Insert the two upper screws (thread on 3 turns). Do not insert the lower screws at this time.
3.Lift the display and carefully guide the display with the two screws into the keyhole openings.
4.Let the display rest in this position while you insert the lower mounting screws.
5.Tighten both the upper and lower mounting screws at this time.
Do not over tighten the screws to the monitor. Failure to do so could result in damaging the monitor or the mounting points.
If your flat panel has a 200mm x 100mm mounting pattern, the
Adjustable Suspension
Adapter
Coupling
Keyhole Opening
Mounting Plate
Mounting Hardware
Display
Keyhole
Opening
Lower
Mounting
Screws
Page 6 | Installation Manual |
