Premier Mounts 9533-004-001-07, PRC AST-2446Installation, Installation Manual, Page

AST-2446 Installation

If the AST-2446 will not be used to mount the PRC, then a suitable piece of threaded pipe can be used. These instructions will tell the user how to mount an AST-2446 to the ceiling. If a custom piece of threaded pipe is used, it is the responsibility of the user to determine how best to mount the PRC and pipe.

Single Stud Installation – Wood screws (Commercially Available)

Solid Surface Installation – Concrete wedge anchors (Commercially Available)

1.Secure the ceiling plate to the ceiling structure.

2.Use suitable hardware (commercially available) depending on your installation environment to secure the two (2, or 4, depending on the structure) mounting points found on the ceiling plate to the ceiling structure.

Four Outer Points are for Solid Surface Installation

Two Inner Points are for Single Stud Installation

3.To adjust the height of the AST-2446, remove the adjustment screws (Page 4), determine the desired height, and re-insert the adjustment screws to lock the AST-2446 into the desired position.

Installation Manual

PRC

Ceiling Surface

Ceiling Plate

Mounting

Hardware

Page 5