PRC
UFP-220 Adapter Plate (Optional Installation)
1.Attach the
2.Attach the PRC mounting plate to the back of the
M4 x 10mm Flat
Head Screws
75VESA
M4 x 5mm Phillips 
Head Screws
Tension Adjustment
1.Swivel Adjustment – Use a ¾” wrench to tighten and
loosen | the swivel adjustment. |
2.Tilt Adjustment - Use a 14mm socket to tighten and loosen the tilt adjustment.
3.After everything has been tightened and the orientation has been determined, tighten the set screw using the supplied M3 Allen wrench.
M6 x 6mm Set
Screw
Swivel Tension
Tilt Tension
Technical Specifications
All measurements are in inches (mm).
Installation Manual | Page - 7 - |
