Premier Mounts RFM, Rotary series installation instructions Warning Statements

RFM

	Table of Contents
Contact Premier Mounts	2
Warning Statements	3
Parts List	4
Installation Tools	4
Thread Depth Indicator	7
Mount Installation	8
Concrete Mounting	9
Universal Mounting Bracket Installation	9
Display Orientation	11
Technical Specifications	11
Warranty	12

Warning Statements

	PRIOR TO THE INSTALLATION OF THIS PRODUCT, THE INSTALLATION INSTRUCTIONS SHOULD BE READ AND
	COMPLETELY UNDERSTOOD. THE INSTALLATION INSTRUCTIONS MUST BE READ TO PREVENT PERSONAL
	INJURY AND PROPERTY DAMAGE. KEEP THESE INSTALLATION INSTRUCTIONS IN AN EASILY ACCESSIBLE
	LOCATION FOR FUTURE REFERENCE.
	PREMIER MOUNTS DOES NOT WARRANT AGAINST DAMAGE CAUSED BY THE USE OF ANY PREMIER MOUNTS
	PRODUCT FOR PURPOSES OTHER THAN THOSE FOR WHICH IT WAS DESIGNED OR DAMAGE CAUSED BY
	UNAUTHORIZED ATTACHMENTS OR MODIFICATIONS, AND IS NOT RESPONSIBLE FOR ANY DAMAGES, CLAIMS,
	DEMANDS, SUITS, ACTIONS OR CAUSES OF ACTION OF WHATEVER KIND RESULTING FROM, ARISING OUT OF OR
	IN ANY MANNER RELATING TO ANY SUCH USE, ATTACHMENTS OR MODIFICATIONS.
	THE SURFACE MUST BE CAPABLE OF SUPPORTING AT LEAST FIVE TIMES THE WEIGHT OF THE DISPLAY. IF NOT,
	THE SURFACE STRUCTURE MUST BE REINFORCED. THE MAXIMUM WEIGHT THAT CAN BE USED WITH THIS
	PRODUCT IS 160LBS. PROPER INSTALLATION PROCEDURE BY A QUALIFIED SERVICE TECHNICIAN, AS OUTLINED
	IN THE INSTALLATION INSTRUCTIONS, MUST BE ADHERED TO. FAILURE TO DO SO COULD RESULT IN SERIOUS
	PERSONAL INJURY, OR EVEN DEATH.
	SAFETY MEASURES MUST BE PRACTICED AT ALL TIMES DURING THE ASSEMBLY OF THIS PRODUCT. USE
	PROPER SAFETY GEAR AND TOOLS FOR THE ASSEMBLY PROCEDURE TO PREVENT PERSONAL INJURY.
	At least two qualified people should perform the assembly procedure. Injury and/or damage can result from dropping or mishandling
	the display.
	If mounting to studs, make sure that the mounting screws are anchored into the center of the studs. Use of an edge-to-edge stud finder
	is recommended.
	Be aware of the mounting environment. If drilling and/or cutting into the mounting surface, always make sure that there are no elec-
	trical wires in wall. Cutting/drilling into an electrical line may cause serious injury.
	Make sure there are no water lines inside the wall where the mount is to be located. Cutting/drilling into a water line may cause
	severe water damage to the mounting surface.
	This product is intended for indoor use only. Use of this product outdoors could lead to product failure and personal injury.
	Do not install near sources of high heat. Do not install on a structure that is prone to vibration, movement or chance of impact
	Contact Premier Mounts with any questions
	(800) 368-9700
	techsupport@mounts.com
Page 2	Installation Instructions