UFA
Support Tube Installation
NOTE: Please refer to the base installation instructions for the assembly of the base and the support tubes. The support tubes and base must already be assembled.
NOTE: If the optional shelf has been purchased, the shelf must be attached prior to attaching the UFA bracket arms. Please refer to the shelf installation instructions. When working with the shelf, take precautions not to scratch it.
Support Tubes
UFA Bracket Arm
Shelf (Optional)
1.Slide the UFA bracket arm over and down the support tubes. This will be the lower bracket arm.
NOTE: The UFA lower mounting bracket can rest on the optional shelf, or base, prior to upper bracket installation.
Attaching the Upper UFA Mounting Bracket
1.Place the display on a soft, flat surface. Locate the mounting points that are located on the back of the display.
2.Once the mounting points are located, place the upper UFA bracket arm over the mounting points.
3.Center the mounting bracket arm on the back of the display.
NOTE: Please refer to ‘Thread Depth Indicator Use’ on Page 5 to determine the correct hardware.
4.Once the desired position has been determined, place the griplates over each mounting point (flat side down) and secure them using the appropriate hardware (see Page 4).
5.At this time, center the UFA mounting bracket on the display and tighten the mounting screws.
Nipples Facing Up | UFA Upper Mounting Bracket |
|
Griplate™
M4 M5 M6 M8
Display
Mounting Point
Mounting Point
Page - 6 - | Installation Instructions |
