UFA
Installing the Display on the Support Tubes
Attaching the Upper UFA Mounting Bracket
WARNING: THE FOLLOWING STEPS MUST BE PERFORMED USING THREE PEOPLE. FAILURE TO DO SO WILL RESULT IN PHYSICAL DAMAGE TO THE DISPLAY AND/OR THE PERSONNEL PERFORMING THESE STEPS.
1. | Two people, one on each side, must pick up the display. | NOTE: In some cases, the support tubes will not voluntarily |
2. | Align the upper UFA mounting bracket above the two | align with the upper UFA mounting bracket. In these |
| support tubes and lower the unit down. | cases, the third person must squeeze, or spread, the |
|
| support tubes together. When the holes and the support |
tubes are aligned, then lower the unit down onto the support tubes.
Set Screw
5/32” Allen Wrench
3.After the appropriate height has been determined, use the 5/32” Allen wrench (supplied) to tighten the two set screws, one of each side of the mounting bracket.
Installation Instructions | Page 7 |
