USA
Support Tube Installation
NOTE: Please refer to the base installation instructions for the assembly of the base and the support tubes. The support tubes and base must already be assembled.
NOTE: If the optional shelf has been purchased, the shelf must be attached prior to attaching the USA bracket arms. Please refer to the shelf installation instructions. When working with the shelf, take precautions not to scratch it.
Support Tubes
USA Bracket Arm
USA Bracket Arm
1.Slide one of the USA bracket arms over and down the support tubes. This will be the lower bracket arm.
NOTE: The USA lower mounting bracket can rest on the optional shelf, or base, prior to upper bracket installation.
Attaching the Upper USA Mounting Bracket
1.Place the display on a soft, flat surface. Locate the mounting points that are located on the back of the display.
2.Once the mounting points are located, place the upper USA bracket arm over the mounting points.
3.Center the mounting bracket arm on the back of the display.
NOTE: Please refer to ‘Thread Depth Indicator Use’ on Page 5 to determine the correct hardware.
4.Once the desired position has been determined, place the griplates over each mounting point (flat side down) and secure them using the appropriate hardware (see Page 4). If nylon spacers are needed, place the spacer over the mounting point, between the display and the USA mounting bracket, insert the appropriate hardware and tighten the screw.
5.At this time, center the USA mounting bracket on the display and tighten the mounting screws.
Nipples Facing Up | USA Upper Mounting Bracket |
Griplate™
M4 M5 M6 M8
Display
Mounting Point | Mounting Point | |
|
| |
Page - 6 - | Installation Instructions |
|