12.Always insert the control assembly in the removable pot before plugging the unit into the wall outlet. Allow unit to cool completely before removing the control assembly.
13.Do not use outdoors.
14.Do not let cord hang over edge of table or counter or touch hot surfaces.
15.Do not place on or near a hot gas or electric burner or in a heated oven.
16.It is recommended that this fryer not be moved when it contains hot oil or other hot liquid. If it must be moved when it contains hot oil or other hot liquid, always use handles on base and use extreme caution.
17.Do not use appliance for other than intended use.
SAVE THESE INSTRUCTIONS
This product is for household use Only.
Important Cord and Plug Information
A short power supply cord is provided to reduce the risk resulting from becoming entangled in or tripping over a longer cord.
DO NOT USE WITH AN EXTENSION CORD.
Do not allow the cord to run underneath or around the unit. The magnetic cord may not detach easily if the cord is positioned in this fashion.
Before First Use
Become familiar with the various parts of the deep fryer (Fig. A1) and read the instructions carefully.
Remove all packing material and disassemble unit for cleaning. Take the frying basket out of the unit. Remove the cord assembly from the basket and set aside. Then, lift the control assembly out of the unit. Wipe the control assembly (control unit with heating element) with a damp cloth. Never immerse the control assembly, cord, or plug in water. Lift the removable pot out of the base and wash the pot, frying basket, and fryer cover in dishwasher or in warm, sudsy water. Rinse and dry thoroughly.
Cover vents
and grease filter
Digital control
and display panel
Control 
Assembly
(Control unit with heating element)
Maximum and
minimum oil levels
Cutout 
Removable pot 
Base 
Handle
Fig. A1
Fryer cover
Removable | Magnetic | |
basket handle | plug end | |
Drain hooks | ||
| Magnetic | |
Frying | cord assembly | |
| ||
basket |
| |
| Back view of control unit | |
| Electrical | |
| pins | |
Reset Button |
| |
The deep fryer is equipped |
| |
with a sensor which will |
| |
automatically shut the unit | Red | |
off if it is overheated. Over- | ||
heating can occur if the unit | Reset | |
button | ||
is heated without oil, with | ||
| ||
insufficient oil, or with | Fig. A2 | |
older oil that has become
thick. If overheating occurs, the deep fryer will beep continuously. In addition, the words “UNPLUG” and “PUSH” will alternately flash in the display panel and the red and green signal lights will flash. To reset the fryer for cooking, see page 5.
2
