I I I . Y O U R P O W E R C H A I R | |
ELECTRONICS TRAY | BATTERIES |
| FREEWHEEL LEVER |
MOTOR/BRAKE ASSEMBLY |
|
| FREEWHEEL LEVER |
Figure 6. Jazzy 1170XL Plus Series Power Base (Shroud Removed) | |
Electronics Tray
The electronics tray is located on the back of the power base. See figure 6. The main circuit breaker and controller connectors are located on the electronics tray.
Main Circuit Breaker: The main circuit breaker is a safety feature built into your power chair. When the batteries and the motors are heavily strained (e.g., from excessive loads), the main circuit breaker trips to prevent damage to the motors and the electronics. If the circuit trips, allow your power chair to “rest” for approximately one minute. Next, push in the circuit breaker button, turn on the controller, and continue normal operation. If the main circuit breaker continues to trip repeatedly, contact your authorized Pride Provider.
Controller Connector: This is where the controller connects to the power base. Each controller uses a different type of harness. Regardless of which type of controller is used, the harness must be secured to the seat assembly and not allowed to drag on the floor.
Jazzy 1170 XL Plus Series | www.pridemobility.com | 17 |
