SCR | Basic Operation Manual | 5 |
Figure 1 provides information on the SCR components and connections. Use this diagram to familiarize yourself with the function and location of each component before using the SCR.
Reverse Indicator
Disregard - this is a non- functioning feature.
Battery Meter
Battery charge level is indicated by a set of six LEDs.
On/Off Switch
Toggles the entire DX control system between the On & Off modes.
LCD Display
Mode Switch
Cycles through the programmed modes.
HHP/Wizard Port
Allows connection to an IBM computer for custom programming and where standard drive programming occurs with the HHP.
DXBUS Socket
For connecting the DX Remote with a DXBUS cable to other DX compatible modules
External Switch Jacks
Three 3.5 mm (1/8") jack sockets to allow connection of external switches
Battery Charger Port
Standard