Pride Mobility I NFMANU1138 manual What if my PMV doesn’t arrive with batteries?, Wrangler

Models: I NFMANU1138

1 44
Download 44 pages 55.82 Kb
Page 25
Image 25
What if my PMV doesn’t arrive with batteries?

I V . B A T T E R I E S A N D C H A R G I N G

With these considerations in mind, you can determine just how often and for how long you should charge your PMV’s batteries. We designed the onboard charger so that it does not overcharge your PMV’s bat- teries; however, you may encounter some problems if you do not charge your batteries often enough and if you do not charge them on a regular basis. Following the guidelines below will provide safe and reliable battery operation and charging:

If you use your PMV daily, charge its batteries as soon as you finish using it for the day. Your PMV will be ready each morning to give you a “full day” of service. We recommend you charge your PMV’s batteries for 8 to 14 hours after daily use.

If you use your PMV once a week or less, charge its batteries at least once a week for 12 to 14 hours at a time.

Keep your PMV’s batteries fully charged. Avoid deeply discharging your PMV’s batteries.

Do not charge your PMV’s batteries for more than 24 consecutive hours.

What if my PMV doesn’t arrive with batteries?

If your PMV does not come with batteries already installed from Pride, you have chosen to purchase the bat- teries separately. Carefully follow the instructions below for proper wire placement and battery installation.

To install the batteries in your PMV:

1.Remove the seat and rear shroud from the PMV.

2.Place the batteries into the battery wells with the terminals facing away from the seat post. Be sure that the positive (+) terminal of the left side battery and the negative (-) terminal of the right side battery are facing forward. See figure 8.

3.Connect the main circuit breaker to the front battery terminals.

4.Connect the rear black cable to the negative (-) battery terminal.

5.Connect the rear red cable to the positive (+) battery terminal.

6.Fasten the battery tie-down straps.

7 Reinstall the rear shroud and seat.

MAIN CIRCUIT BREKAER

BATTERY TIE-DOWN STRAP

To install the batteries in your PMV:Manual backgroundManual background$8;

Manual backgroundManual background%$7Manual backgroundManual background

BATTERY

REAR BLACK CABLE

REAR RED CABLE

 

Figure 8. Placing and Removing Batteries

 

Wrangler

www.pridemobility.com

25

Page 25
Image 25
Pride Mobility I NFMANU1138 What if my PMV doesn’t arrive with batteries?, To install the batteries in your PMV, Wrangler