Pride Mobility INFMANU4093 manual P E N D I X I Specification S, Stylus LS Specifications

A P P E N D I X I - S P E C I F I C A T I O N S

	STYLUS LS SPECIFICATIONS
Seat Dimensions:	16 in. x 16 in., 16 in. x 18 in., 18 in x 16 in., 18 in. x 18 in., 20 in. x 16 in., 20 in. x 18 in.
Back Height:	17-19 in. (43.18-48.26 cm)
Seat Upholstery:	Adjustable tension
Seat-to-Floor Height	See figure 13.
Caster Wheels:	5 in. (12.70 cm), 6 in. (15.24 cm), or 8 in. (20.32 cm)
Axle Mount:	3-position
Caster Fork:	3-position axle; short fork
Maximum Safe Slope:	5° (8.7%)
Turning Radius:1	See figure 28.
Overall Size:1	Length: See figure 28.
	Width: See figure 28.
Weight Capacity:	250 lbs. (113.4 kg)
Component Weight:	Base: 32.5 lbs. (14.74 kg) without front riggings
Armrests:	Flip-back, desk-length; Height-adjustable, desk or full length
Front Riggings:	Swing-away foot rests, Elevating leg rests
Wheel Locks:	Push-to-lock or pull-to-lock
Frame Finish:	Silver Vein
Accessories:	Anti-tip wheels; oxygen tank holder; wheel lock extension
Static Stability Forward (Wheels Locked)	10°
Static Stability Rearward (Wheels Locked)	14° (without oxygen tank and holder); 13° (with oxygen tank and holder)
Wheel Lock Operational Force2	Left: 60N Right: 60N

1Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.

2Test results for Stylus LS equipped with push-to-lock wheel locks in accordance with ANSI-RESNA WC Vol. 2 Section 03. Max- imum operating force for hand operated wheel locks is 60N (+ or – ) 10%. Operational force can vary based on tire type, manufac- ture, and condition.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12183 standards. All specifications subject to change without notice.

28 www.pridemobility.com Stylus LS