Pride Mobility J6 2SP manual P E N D I X I Specification S, J6 Specifications

A P P E N D I X I - S P E C I F I C A T I O N S

J6 SPECIFICATIONS

Suspension:	Active-Trac Extreme (ATX)
Drive Wheels:	10 in. (25.4 cm), pneumatic and solid available
Front Caster Wheels:	5 in. (12.7 cm), solid
Rear Caster Wheels:	6 in. (15.24 cm), solid
Maximum Speed:1	Up to 4 mph (6.44 km/h)
Range:1,4	Up to 15 miles (24.14 km)
Brakes:	“Intelligent Braking” electromagnetic regenerative, disc park brake
Ground Clearance:2	See figure 29.
Turning Radius:2	See figure 29.
Overall Size:2	Length: See figure 29.
	Width: See figure 29.
Drivetrain:	Two motor, mid-wheel 6-drive
Batteries:3	Two 12-volt, U-1 batteries
Battery Charger:	5-amp, off-board
	300 lbs. (136 kg)
Weight Capacity:	160 lbs. (72.57 kg) with Synergy Manual Tilt
	250 lbs. (113.4 kg) with Synergy TRU-Balance Power Positioning Systems
	Base: 104.5 lbs. (47.4 kg) without seat and batteries
Component Weights:2,5	Contour Seat: 42.5 lbs. (19.28 kg)
	Batteries: 24.5 lbs. (11.11 kg) each
Freewheel	Left: 54 N Right: 54 N
Operational Force

1Varies with base model, user weight, terrain type, battery amp hour rating (Ah), battery charge, battery condition, motors, controller type, tire type, and tire condition.

2Due to manufacturing tolerances and continued product improvement, this specification can be subject to a variance of (+ or – ) 3%.

3AGM or Gel-Cell type required. See VI. “Batteries and Charging.”

4Tested in accordance with ANSI/RESNA, WC Vol 2, Section 4 & ISO 7176-4 standards. Results derived from theoretical calculation based on battery specifications and drive system performance. Test conducted at maximum weight capacity.

5Battery weight may vary based on battery manufacturer.

NOTE: This product conforms to all applicable ANSI-RESNA testing requirements and ISO 7176 series EN12184 standards. All specifications subject to change without notice.

42 www.pridemobility.com J6 Series