Pride Mobility Jazzy 1170XL owner manual Controller Position, To change the controller position

Models: Jazzy 1170XL

1 52
Download 52 pages 2.45 Kb
Page 25
Image 25

V . C O M F O R T A D J U S T M E N T S

Controller Position

You can position the controller for either left-hand or right-hand use.

To change the controller position:

1.Turn off the power to the controller.

2.Disconnect the controller from the electronics tray.

3.Cut the wire tie(s) securing the controller cable to the armrest.

4.Flip up the armrest and loosen the setscrew. See figure 21.

5.Slide the controller out of the armrest.

6.Loosen the setscrew in the other armrest.

7.Place the controller in the other armrest.

8.Tighten the setscrew to secure the controller.

9.Use a wire tie to secure the controller cable to the armrest.

10.Connect the controller to the electronics tray.

Swing-away Footrests

Swing-away Footrests (SFRs) are an option. They enable you to rotate the leg rests to the side before you transfer onto or off of your power chair.

To rotate the SFRs:

1.Push in the release lever. See figure 22.

2.Rotate the SFRs.

To adjust the SFR length:

1.Remove the two adjustment screws from the side of each footrest extension. See figure 22.

2.Slide the footrest up or down to the desired length.

3.Reinstall the two adjustment screws.

Elevating Leg Rests (Optional)

Elevating Leg Rests (ELRs) offer an infinite range of adjustment for the leg angle and a footrest ad- justment range of 12–19 in.

To rotate the ELRs:

1.Push in release lever A. See figure 23.

2.Rotate the ELRs.

FOOTREST EXTENSION

SFR RELEASE LEVER

FOOTREST

ADJUSTMENT

SCREWS

Figure 22. Swing-away Footrest Adjustment

RELEASE LEVER A

RELEASE LEVER B

LEG REST

EXTENSION

LEG REST

ADJUSTMENT

SCREWS

Figure 23. Elevating Leg Rest Adjustment

Jazzy 1170XL

www.pridemobility.com

25

Page 25
Image 25
Pride Mobility Jazzy 1170XL owner manual Controller Position, To change the controller position, Swing-away Footrests