V . C O M F O R T A D J U S T M E N T S
Controller Position
You can move the controller in toward or out away from the armrest, or change the position of the control- ler for either
WARNING! Do not place the controller harness so that it can be pinched in the seat frame or the power base frame.
To change the controller position:
1.Turn off the power to the controller.
2.Unplug the controller harness from the power base.
3.Remove any wire ties securing the controller har- ness to the armrest.
4.Loosen the mounting screws in the controller mounting block. See figure 14.
5.Slide the controller mounting block off of the arm- rest.
6.Reinstall the controller mounting block onto the other armrest.
7.Tighten the mounting screws.
8.Secure the controller harness to the armrest with wire ties.
9.Plug the controller harness back into the power base.
Foot Platform Height Adjustment
The foot platform height is easily adjusted to different heights in
To raise or lower the foot platform:
1.Remove the hardware from the foot platform bracket. See figure 15.
2.Raise or lower the foot platform to the desired height.
3.Reinstall the hardware into the foot platform bracket and tighten.
Foot Platform Angle Adjustment
You can adjust the angle of the foot platform with a hex key. See figure 15.
To adjust the foot platform angle:
1.Flip up the foot platform and locate the setscrews.
2.Turn the setscrews to raise or lower the front of the foot platform.
MOUNTING SCREWS
SETSCREWS
Figure 14. Controller Mounting Block
FOOT PLATFORM |
BRACKET |
SETSCREWS |
Figure 15. Foot Platform Adjustment
26 | www.pridemobility.com | Quantum Jazzy 1650 Series |