V I I . C A R E A N D

AXLE KEY

 

DRIVE WHEEL

AXLE

SLOT

WASHER

 

 

DRIVE WHEEL

 

SPACER

DRIVE WHEEL NUT

 

M A I N T E N A N C E

 

TIRE

 

TUBE

 

SCREWS

FRONT RIM

REAR RIM

HALF

HALF

Figure 20. Quantum Jazzy 1650 Drive Wheel

Figure 21. Quantum Jazzy 1650 Drive Wheel Disassembled

Follow these easy steps for a quick and safe repair for both pneumatic and solid tires:

1.Turn off the power to the controller.

2.Set the power chair up on blocks.

3.If you are changing a pneumatic tire, completely deflate it before removing the wheel.

4.Remove the drive wheel nut and washer from the axle. See figure 20.

5.Pull the wheel off the axle.

6.Remove the screws from the rim assembly and separate the front and rear rims. See figure 21.

7.Remove the old tube from the pneumatic tire and replace it with a new tube or replace the entire assembly if it is a solid tire.

8.Reassemble the rims and reinstall the screws.

9.Slide the wheel back onto the axle. Make sure the key is in the axle slot and the drive wheel spacer is installed on the axle shaft.

WARNING! Failure to ensure that the axle key is properly installed into the axle slot when mounting the wheel can result in electronic brake failure, personal injury and/or product damage.

10. Reinstall the drive wheel nut and washer onto the wheel axle and tighten.

WARNING! Make sure both the nut and washer are reinstalled and tightened properly.

11.Inflate the pneumatic tire to the psi/bar/kPa air pressure rating indicated on each tire.

12.Remove the power chair from the blocks.

Battery Replacement

A battery wiring diagram is printed on a decal located on the battery tray. See VI. “Batteries and Charging” for correct battery specifications.

MANDATORY! Battery posts, terminals and related accessories contain lead and lead compounds. Wear goggles and gloves when handling batteries and wash hands after handling.

WARNING! The batteries in your power chair should only be serviced or replaced by a Quantum Rehab Provider or a qualified technician.

WARNING! Do not replace batteries when seat is occupied.

WARNING! Power chair batteries are heavy. See specifications table. If you are unable to lift that much weight, be sure to get help. Use proper lifting techniques and avoid lifting beyond your capacity.

WARNING! Do not mix old and new batteries. Always replace both batteries at the same time.

36

www.pridemobility.com

Quantum Jazzy 1650 Series

Page 35 Page 37
Page 36
Image 36
Pride Mobility Jazzy 1650 2EHD, Jazzy 1650 3EHD, Quantum 1650 2SPVHD manual I . C a R E a N D, Battery Replacement
Page 35 Page 37

Jazzy 1650 3EHD, Quantum 1650 3SPVHD, Jazzy 1650 2EHD, Quantum 1650 2SPVHD specifications

Pride Mobility has long been recognized as a leader in the field of mobility solutions, delivering products that enhance the quality of life for individuals with mobility challenges. Among its impressive lineup, the Jazzy and Quantum series stand out, particularly the Jazzy 1650 2EHD, Quantum 1650 2SPVHD, Quantum 1650 3SPVHD, and Jazzy 1650 3EHD models. Each of these powerchairs boasts innovative features and cutting-edge technology designed to ensure maximum comfort, safety, and maneuverability.

The Jazzy 1650 2EHD is designed for heavy-duty use, equipped with a robust frame capable of supporting users with a weight capacity of up to 600 pounds. This model features Enhanced Dual Drive technology, providing superior power and performance for tackling diverse terrains. Equipped with advanced suspension, the Jazzy 1650 2EHD offers a remarkably smooth ride, minimizing discomfort over uneven surfaces.

Meanwhile, the Quantum 1650 2SPVHD model showcases superior engineering tailored for exceptional performance and versatility. It is equipped with a patented Mid-Wheel 6 technology that ensures optimal maneuverability, allowing users to navigate tight spaces with ease. With its high-performance motor and heavy-duty components, this powerchair offers an impressive range, making it suitable for both indoor and outdoor use.

The Quantum 1650 3SPVHD elevates the user experience with additional enhancements such as advanced electronics and programmable options. This model not only supports a weight capacity of 600 pounds but also features a 3-speed control system, allowing users to adjust their pace according to their environment. Its sophisticated seating system provides enhanced comfort and adjustability, ensuring personalized support for users with diverse needs.

Lastly, the Jazzy 1650 3EHD takes mobility to the next level with features designed for both durability and sophistication. With its ergonomic design and quality materials, the Jazzy 1650 3EHD ensures that users not only enjoy functionality but also aesthetic appeal. The heavy-duty construction combined with superior performance gives users confidence while navigating various settings.

In conclusion, the Pride Mobility Jazzy and Quantum series, particularly the Jazzy 1650 2EHD, Quantum 1650 2SPVHD, Quantum 1650 3SPVHD, and Jazzy 1650 3EHD models, reflect the commitment to innovation in mobility solutions. With their combination of advanced technology, robust design, and user-centric features, these powerchairs provide individuals with the freedom and independence to lead a fulfilling life.
Top Page Image Contents