Toshiba 3511, 4511 manual Disassembly and Replacement, Oil roller

16.7 Disassembly and Replacement

[A] Fuser unit

(1)Take off the IH terminal cover ( Chapter 2.5.1 [K])

(2)Disconnect 2 connectors and 4 faston terminals.

Notes: 1. Make sure to hold the plastic part of the faston terminals when disconnecting them.

2.Make sure not to connect each terminal to the wrong position.

(3)Remove 2 screws and take off the fuser unit.

[B] Oil roller

(1)Take off the fuser unit ( Chapter 16.7 [A]).

(2)Open the jam access cover and transport guide.

16

(3) Remove 2 screws and take off the cleaning unit by lifting it up.

Note: When installing, fit 2 protrusions on the bottom of the cleaning unit into the holes of the frame securely.

RED	BLUE	WHITE
(S)	(C)
		WHITE
		Fig. 16-701

Fig. 16-702

Transport guide

Jam access cover

Fig. 16-703

Cleaning unit

Fig. 16-704

e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 16 November 2003 © TOSHIBA TEC