November 2003 © TOSHIBA TEC 11 - 17 e-STUDIO3511/4511 DRUM RELATED SECTION
11
Fig. 11-732
[G] Toner bag full detection sensors
(G-1) Toner bag full detection sensor-1
(1) Take off the developer unit, cleaner unit and
transfer belt unit ( Chapters 12.8 [A], 11.7
[A] and 14.7 [A]).
(2) Remove 1 screw and disconnect 1 connector.
Take off the toner bag full detection sensor-1
with the whole bracket.
(G-2) Toner bag full detection sensor-2
(1) Open the front cover.
(2) Release 4 latches and take off the toner bag
full detection sensor-2.
Fig. 11-733
(5) Disconnect 2 connectors and take off the
charger cleaner front position detection switch
and charger cleaner rear position detection
switch.
(3) Release 2 latches and take off the front position
switch arm.
(4) Remove 1 screw and take off the rear position
switch arm.
Fig. 11-730
Fig. 11-731
Front position
switch arm
Rear position
switch arm