Toshiba 3511, 4511 manual IH error

16

(2) IH error

Checking timing	Error content	Port input value		Error code
		H1ERR1	H1ERR2
Power ON	Initial abnormality	L	L	C470
In warming up	IH power voltage abnormality	L	L	C470
Detecting 40°C	IGBT high temperature abnormality /	L	H	C480
	Continuous energization (15 sec.)
	IH circuit/coil abnormality	H	H	C490
In warming up	IH power voltage abnormality	L	L	C470
Detecting 40°C	IGBT high temperature abnormality /	L	H	C480
During ready status	Continuous energization (15 sec.)
	IH circuit/coil abnormality	H	H	C490
During ready status	IH power voltage abnormality	L	L	C470
During printing	IGBT high temperature abnormality /	L	H	C480
At Energy Saving Mode	Continuous energization (15 sec.)
	IH circuit/coil abnormality	H	H	C490
	Normal	H	L	-

Initial abnormality:

CPU (IH) abnormality is not cleared.

IH power voltage abnormality:

The input voltage becomes above 20% (approx.) or below 20% (approx.) of the rated voltage.

IGBT high temperature abnormality:

Overheating of IGBT or short- or open-circuit of IGBT temperature-detecting sensor.

IH circuit abnormality:

Abnormality in IH circuit

IH coil abnormality:

Temperature-detecting sensor in IH circuit is abnormal, or IH coil is open-circuited or wrongly in- stalled.

e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 14 November 2003 © TOSHIBA TEC