Toshiba 4511, 3511 manual Loosen 3 screws and take off the bracket

(8) Loosen 3 screws and take off the bracket.

Bracket

Fig. 14-704

(9)Lift up the transfer belt cleaning unit and move it out to the front side temporarily. Then place the unit on the rear frame and front frame.

(10) Pull out the transfer belt unit.

Notes: 1. When installing or taking off the transfer belt unit, be careful not to scratch the transfer belt.

2.Do not touch the transfer belt surface with bare hands.

3.When the transfer belt unit has been installed or contact/release operation of the unit has been performed, press the unit down until the unit is securely fixed (as shown in the figure at right) to engage the transfer belt drive gear.

Transfer belt cleaning unit

Fig. 14-705

Transfer belt unit

Fig. 14-706

Fig. 14-707

14

November 2003 © TOSHIBA TEC	14 - 7	e-STUDIO3511/4511 TRANSFER/TRANSPORT UNIT
	04/05