Toshiba 3511, 4511 manual Exit roller

(8)Remove 1 screw.

(9)Enlarge the frame and take off the transport guide.

3

2

1

16

[L] Exit roller

(1)Take off the fuser unit ( Chapter 16.7 [A]).

(2)Open the jam access cover of the fuser unit.

(3)Remove 2 screws (one of the front side is a shoulder screw) and take off the exit roller cover.

(4)Remove 1 E-ring and 1 bushing from the exit roller front side.

(5)Remove E-ring, gear unit, E-ring and bushing in order from the exit roller rear side. Then take off the exit roller.

Fig. 16-741

Exit roller cover

(Shoulder screw)

Fig. 16-742

Bushing

Exit roller

E-ring

Fig. 16-743

Gear unit	Bushing	Exit roller
E-ring	E-ring
	Fig. 16-744

e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 26 November 2003 © TOSHIBA TEC