Toshiba 4511, 3511 manual Remove the base, Drum

(4) Remove the base.

Note: Reinstall the base at the same position on the belt as before removing. It is recommend- able to leave the mark on the belt in advance.

[C] Drum

(1)Take off the cleaner unit ( Chapter 11.7 [A]).

(2)Remove 3 screws and take off the bracket.

Base

Fig. 11-715

Bracket

Fig. 11-716

11

(3)Take off the drum upward by sliding it toward the front side.

Notes: 1. Do not touch, scratch or spit on the drum surface.

2.Try to avoid direct sunlight to the drum. Lay it on the dark place immediately after taking off.

3.Do not touch the drum thermistor during the disassembly and replacement.

4.Do not touch or damage the edge of the cleaning blade.

5.When replacing the drum, take off the drum shaft bearing from the old drum and install it on the new drum.

6.Check the color deviation after replacing the drum.

Drum

Drum shaft bearing

Fig. 11-717

November 2003 © TOSHIBA TEC 11 - 13 e-STUDIO3511/4511 DRUM RELATED SECTION

04/10