Toshiba 3511, 4511 Saddle Stitch, Tray Full Ready, Change Drawer To Correct Paper Size, Copying

5

No.	Message	State of equipment	Note
20	READY	Saddle stitcher tray is full of paper
	(SADDLE STITCH	- Scanning is enabled
	TRAY FULL)
21	READY	Incorrect paper size setting
	(CHANGE DRAWER
	TO CORRECT
	PAPER SIZE)
22	Ready for bypass	Paper is set on the bypass tray
	feeding
23	COPYING	At the copying state
24	Auto Start	Auto Start is set during printing	Cleared by pressing [RESET] button
			or [STOP] button
25	Close Large Capacity	LCF drawer is not installed when feeding	Cleared by installing LCF drawer
	Feeder	from LCF is set
26	Close Large Capacity	LCF cover is open when feeding from LCF is	Cleared by closing the cover
	Feeder Door	set
27	Place Doc. Feeder in	RADF is open when original is placed on	Cleared by closing RADF
	the down position	RADF
28	Insert key copy	Key copy counter not inserted	Cleared by inserting key copy
	counter		counter
29	Place originals in the	Displayed when the conditions are set and	Cleared by setting the original
	document feeder	START button is pressed with no original
		placed
30	Change direction of	Displayed when the direction of original
	original	placed is different from the setting
31	Place last %d	Paper jam occurred during copying (RADF
	originals in doc.	scanning)
	feeder entrance tray
32	Cannot copy this	Displayed when the original which is not	Not printed out
	original	allowed to be copied is placed
33	Add paper	Displayed when the paper in selected drawer
		is running out
34	Cannot duplex this	Displayed when the paper size which is not
	size	specified for duplex copying is set
35	Cannot use this	Displayed when the paper size which is not
	media type	specified for the functions such as stapling or
		hole punching is set
36	Copy size: A4/LT	Displayed when the paper size which is not
	only	specified for “Book-type duplex copying” or
		“Dual-page” is set
37	Copy size: A4/LT and	Displayed when the paper size which is not
	A4-R/LT-R	specified for “Rotate Sort”
38	CHANGE DRAWER	Displayed when the selected paper size is
	TO CORRECT	not in the drawer
	PAPER SIZE
39	Change drawer to	Displayed when the selected media type is
	correct media type	not in the drawer

e-STUDIO3511/4511 CONTROL PANEL 5 - 4 November 2003 © TOSHIBA TEC