Toshiba 3511, 4511 manual Tray drive unit

[F] Tray drive unit

(1)Take off the fuse PC board bracket

Chapter 2.5.2 [H]).

(2)Remove 2 screws and take off the bracket.

Bracket

Fig. 10-445

(3)Disconnect 1 connector, remove 4 screws and take off the tray drive unit.

10

(4)Turn the tray drive unit. Release 6 latches and take off the cover.

Note: When taking off the cover, be careful of the spring inside the tray drive unit which pushes the cover.

(5) Take off the tray-up motor.

Note: When assembling the tray drive unit, match the gear bosses with the holes of the cover.

Tray drive unit

Fig. 10-446

Latch

Latch

Latch

Cover

Latch

Fig. 10-447

Bosses

Tray-up motor

Fig. 10-448

e-STUDIO3511/4511 PAPER FEEDING SYSTEM	10 - 22	November 2003 © TOSHIBA TEC
	04/05