(4)Temperature control at energy saving mode

This equipment has the following two types of temperature control for saving energy and returns to ready status to perform printing in each mode upon printing request.

The period of time from the printing request to this mode can be set in the Setting Mode (08) or by an from administrator.

Administrator setting procedure:

[USER FUNCTIONS] button [ADMIN] (input of administrator’s password) [GENERAL]

[ENERGY SAVER]

Auto Power Save Mode (Setting Mode (08-205)):

When the printing is not performed in a specified period of time (default setting: 15 min.) after the previous printing is completed, the equipment enters to Auto Power Save Mode. ON/OFF of IH coil is controlled to maintain the fuser belt surface temperature at 100oC.

Auto Shut Off Mode (Setting Mode (08-206)):

When the printing is not performed in a specified period of time (default setting: e-STUDIO3511: 60

min. / e-STUDIO4511: 90 min.) after the equipment entered to Auto Power Save Mode, the equip- ment then enters to Auto Shut Off Mode to turn OFF the IH coil.

 

 

 

 

 

Auto Power Save

 

C

Warming-up

Ready

During printing

Fixed time (08-205)

Mode

Auto

 

 

 

 

 

Shut Off

 

 

 

 

 

 

 

 

 

 

 

Fixed time (08-206)

Mode

180

 

 

 

 

 

 

100

 

 

 

 

 

 

Temperature

 

 

 

 

 

 

of fuser belt

IH coil ON

 

 

 

 

OFF

 

 

 

 

 

0

 

 

 

 

 

 

 

 

 

Fig. 16-405

 

 

16

November 2003 © TOSHIBA TEC

16 - 9 e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION

Page 287
Image 287
Toshiba 4511, 3511 manual Energy Saver