Toshiba 3511, 4511 manual Image quality sensor / Image quality sensor Shutter solenoid

15.5 Disassembly and Replacement

[A] Image quality sensor / Image quality sensor

shutter solenoid

(1)Take off the fuser unit ( Chapter 16.7 [A]). Take off the transfer belt unit ( Chapter 14.7 [A]).

(2)Open the 2nd transfer cover. Remove 2 screws

and disconnect 2 connectors. Take off the image quality sensor assembly.

Note: Insert latches of sensor case to the hole of the plate securely when installing.

(3)Remove 2 screws and take off the image quality sensor.

(4)Remove 2 screws and take off the image quality sensor shutter solenoid.

Connector

Image quality sensor assembly

Fig. 15-501

Image quality sensor

shutter solenoid

Image quality sensor

Fig. 15-502

15

e-STUDIO3511/4511 IMAGE QUALITY CONTROL 15 - 4 November 2003 © TOSHIBA TEC