Toshiba 3511, 4511 manual Temperature/Humidity sensor, Ozone filter, Ozone exhaust fan

[H] Temperature/Humidity sensor

(1)Take off the front cover, receiving tray and left cover ( Chapter 2.5.1 [A] [B] [F]).

(2)Remove 2 screws and take off the inner cover.

(3)Disconnect 1 connector. Then release 2 latches and take off the temperature/humidity sensor.

Latch

11

Inner cover

Fig. 11-734

Temperature/

Humidity sensor

[I] Ozone filter

(1)Remove 1 screw and take off the cover.

(2)Pull out the ozone filter.

[J] Ozone exhaust fan

(1)Take off the SYS board with the whole case ( Chapter 2.5.2 [C]).

(2)Take off the ozone filter ( Chapter 11.7 [I]).

(3)Disconnect 1 connector and remove 2 screws. Take off the ozone exhaust fan with the whole cover.

Fig. 11-735

Ozone filter

Fig. 11-736

Connector

Fig. 11-737

e-STUDIO3511/4511 DRUM RELATED SECTION 11 - 18 November 2003 © TOSHIBA TEC