4.3 Detection of Abnormality

When something abnormal has occurred in the equipment, symbols corresponding to the type of abnormality are displayed.

4.3.1 Types of abnormality

A)Abnormality cleared without turning OFF the door switch

(1)Add paper

(2)Paper misfeed in bypass

B)Abnormality not cleared without turning OFF the door switch

(1)Misfeed in equipment

(2)Add toner

(3)Developer unit not installed properly

(4)Toner bag replacement

C)Abnormality not cleared without turning OFF the main switch

(1)Call for service

4.3.2Description of abnormality A-1) Add paper

[In case of the equipment drawer or PFP drawer] (When drawer is not installed) Drawer not detected

4

Drawer is not installed: Drawer is installed but there is no paper in it:

No paper

A signal sent to the control circuit

Drawer area of the illustration blinks (When the drawer is selected)

[START] button is disabled.

[In case of the equipment, PFP or LCF drawers] (When drawer is installed)

Based on the combination of the tray-up motor movement and the status of tray-up sensor and empty sensor, CPU detects the presence of paper.

November 2003 © TOSHIBA TEC

4 - 7

e-STUDIO3511/4511 GENERAL OPERATION

Page 87
Image 87
Toshiba 4511, 3511 manual Detection of Abnormality, Types of abnormality, Description of abnormality A-1 Add paper