Toshiba 3511, 4511 manual Disassembly and Replacement, Stopper, Slide the stopper and pull it out

5.5 Disassembly and Replacement

Note: When taking off the control panel, check the position of the stopper; if the stopper is at the position “b”, remove the stopper or move it to the position “a”.

5

a b

Fig. 5-501

[A] Stopper

(1) Slide the stopper and pull it out.

Stopper

[B] Control panel unit

(1)Take off the right upper cover and the front upper cover ( Chapter 2.5.1 [J] [I]).

(2)Disconnect 1 connector.

(3)Remove 2 screws and take off 2 harness clamps.

(4)Lower the control panel and remove 6 screws.

(5)Take off the control panel unit while sliding it.

Fig. 5-502

Fig. 5-503

Fig. 5-504

e-STUDIO3511/4511 CONTROL PANEL 5 - 12 November 2003 © TOSHIBA TEC