Toshiba 3511, 4511 2nd transfer roller position detection sensor, Paper clinging detection sensor

14

(7)Remove 1 screw and the pin. (Front side)

(8)Remove 1 screw and the pin. (Rear side)

(9)Disconnect 1 connector and take off the case.

(10)Remove 1 clip and take off the 2nd transfer roller contact clutch.

[L] 2nd transfer roller position detection sensor

(1)Take off the 2nd transfer unit ( Chapter 14.7 [J]).

(2)Take off the case ( Chapter 14.7 [K]).

(3)Disconnect 1 connector. Then take off the 2nd transfer roller position detection sensor.

[M] Paper clinging detection sensor

(1)Take off the transfer belt unit ( Chapter 14.7 [A]).

(2)Open the ADU and 2nd transfer unit.

(3)Remove 1 screw to slide the bracket downward. Then disconnect 1 connector.

Pin

Case

Pin

Fig. 14-745

Clip

2nd transfer roller

contact clutch

Fig. 14-746

2nd transfer roller

position detection

sensor

Fig. 14-747

Bracket

Fig. 14-748

e-STUDIO3511/4511 TRANSFER/TRANSPORT UNIT 14 - 18 November 2003 © TOSHIBA TEC

04/05