Toshiba 4511, 3511 manual Carriage Refer to the Service Handbook for more details

(7) Attach the wire holder jigs to the pulleys to prevent the wires from loosening.

Note: Refer to “3.9 Adjustment of the Scanner Section” in the Service Handbook for the direction of the wire holder jigs.

(8)Detach the tension springs of the front and rear sides.

(9)Remove the carriage wires.

(10)Take off the carriage-2 while its corner is pushed into the window of the rail and inclining

the carriage.

Note: When replacing the mirrors-2 and -3, replace the carriage-2 together with mirrors-2 and -3. Mirrors-2 and -3 should not be removed.

Notes: 1. When installing carriage-2, fix the bracket temporarily at the position (A). Then move it to the direction (B), push it to the end and fix securely.

2.Refer to the Service Handbook for more details.

	Fig. 6-719
Carriage wire	Tension spring
	Fig. 6-720

Carriage-2

Fig. 6-721

(A)

(B)

(A)

Fig. 6-722

6

November 2003 © TOSHIBA TEC 6 - 21 e-STUDIO3511/4511 SCANNER