Toshiba 3511, 4511 manual Bypass feed copying, Interruption copying

4

4.2.4 Bypass feed copying

(1)Insert a paper into the bypass tray.

•Bypass paper sensor is turned ON.

-“Ready for bypass feeding” is displayed.

•Carriages move to the home position.

(2)Press the [START] button ON

•“Ready for bypass feeding” changes to “COPYING”.

•Exposure lamp ON

•Scan motor ON → Carriages-1 and -2 move forward.

•Main motor, transport motor, developer motor and exit motor turned ON

-The drum, fuser unit, developer unit and exit roller are driven.

•Drum cleaner brush motor turned ON.

(3)Bypass feeding

•Fans rotate in high speed.

•Bypass feed clutch turned ON.

-The bypass pickup roller is lowered.

-The bypass pickup roller, feed roller and separation roller start to rotate.

•Aligning operation

•Paper reaches the registration roller.

•After a certain period of time, the bypass feed clutch turned OFF.

(4)Hereafter, operations (3) through (6) of “4.2.3. Drawer feed copying” are repeated.

4.2.5 Interruption copying

(1)Press the [INTERRUPT] button

•LED “INTERRUPT” is turned ON.

•Copying operation in progress is temporarily stopped, and the carriages-1 and -2 return to appropriate positions.

•“Job interrupted job 1 saved” is displayed.

•Automatic density and reproduction ratio 100% are set. Set number remains the same.

(2)Select the desired copy condition

(3)After interruption copying is finished:

•“Press interrupt to resume job 1” is displayed.

•LED “INTERRUPT” is turned OFF by pressing the [INTERRUPT] button, and the equipment returns to the status before the interruption.

•“Ready to resume job 1” is displayed.

(4)Press the [START] button

The copying operation before the interruption is resumed.

e-STUDIO3511/4511 GENERAL OPERATION 4 - 6 November 2003 © TOSHIBA TEC