Toshiba 4511, 3511 manual Carriages-1

(4) Remove 3 screws and take off the scan motor with the whole bracket.

Note: When installing the scan motor, fix it with a belt tension jig (spring).

Notes: When installing the scan motor, use the belt tension jig (spring). The procedure is as follows.

1.Fix the screw A.

2.Temporarily fix the screw B and C.

3.Hook the belt tension jig to the motor bracket and the flame.

4.The scan motor is pulled by the belt tension jig. Fix the screw B and then C at the stopped position.

5.Remove the belt tension jig.

[H]Carriages-1 and -2

(1)Remove the original glass and take off the upper rear cover ( Chapters 6.7 [A], 2.5.1 [Q]).

(2)Move the carriage and position the holes of the carriage to the holes of the frame.

(3)Remove 2 screws and take off the brackets fixing the carriage-1 to the wire.

Scan motor

Fig. 6-712

Belt tension jig

C
A	B
Fig. 6-713
Carriage-1
Fig. 6-714

6

November 2003 © TOSHIBA TEC	6 - 19	e-STUDIO3511/4511 SCANNER
	04/05