Toshiba 4511, 3511 manual For ASD, AUD, CND, Off, Fax

16.4.4 Relation between system configuration and IH output for NAD, SAD, TWD:

System configuration	Warming up (*2)	Ready	Printing	Energy saving	Automatically	Warming up
				mode	OFF	time
Equipment only			1080W
	1160-1300W
Equipment and			1020W
RADF (*1)
Equipment, RADF (*1)
and FIN	1160-1260W		960W
						Approx
Equipment, RADF (*1),		800W		800W	OFF
FIN, and HPU						40 sec.
Equipment, RADF (*1),
FIN, HPU and LCF
Equipment, RADF (*1),	1140-1240W		940W
FIN, HPU, LCF and
FAX

for ASD, AUD, CND:

System configuration	Warming up (*2)	Ready	Printing	Energy saving	Automatically	Warming up
				mode	OFF	time
Equipment only			1240W
Equipment and	1160-1300W		1180W
RADF (*1)
Equipment, RADF (*1)
and FIN	1160-1260W		1120W
Equipment, RADF (*1),		700W		700W	OFF	Approx
FIN, and HPU						40 sec.
Equipment, RADF (*1),
FIN, HPU and LCF
Equipment, RADF (*1),	1140-1240W		1100W
FIN, HPU, LCF and
FAX

*RADF: Reversing automatic document feeder, FIN: Finisher, HPU: Hole punch unit, LCF: Large

capacity feeder, FAX: FAX unit

(*1) The wattage lowers 50 W more when the scanning is performed from the RADF during warming up.

(*2) AC power should be input voltage when the equipment is warming up (The lower the voltage is, the longer the warming up time becomes).

November 2003 © TOSHIBA TEC 16 - 7 e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION

16

04/10