Toshiba 4511, 3511 manual Description of Operation, Operation of bypass pickup roller

10.2 Description of Operation

10.2.1 Operation of bypass pickup roller

When the bypass pickup solenoid is turned ON, the plunger is pulled, and then the lever is rotated. The pickup arm is then brought down with its own weight. When the bypass pickup solenoid is turned OFF, the pickup arm is brought up by the spring force.

The driving force transmitted through the bypass feed clutch is transmitted to the bypass feed roller through the shaft and then to the bypass pickup roller through the timing belt. The roller is rotated by this driving force.

Bypass pickup solenoid Spring

Pickup roller

10

Lever

Pickup arm

Fig. 10-201

November 2003 © TOSHIBA TEC 10 - 5 e-STUDIO3511/4511 PAPER FEEDING SYSTEM