Toshiba 3511 Exit sensor detects jamming of the trailing edge Paper, After approx 1.3 seconds

4

• Exit sensor detects jamming of the trailing edge of

paper	Registration clutch		OFF
Registration clutch turned OFF	Exit sensor
↓ Approx 1.3 sec*
			ON
Exit sensor turned OFF
If the exit sensor is not turned OFF	Timer
after approx 1.3 seconds,
			Approx 1.3 sec.
↓
Paper jam (E020) → The copying operation is
			Paper jam (E020)
stopped.		Fig. 4-302

•Immediately after the power ON

↓

Any of all sensors on paper transport path detects paper (ON)

↓

Paper jam (E030)

•Front cover is opened during copying

↓

Paper jam (E410)

•Registration sensor detects jamming of the leading edge of paper:

The registration sensor is not turned ON in a fixed period of time after the leading edge of paper passed the transport roller.

↓

Paper jam (E120, E200, E210, E300, E330 and E3C0)

•During paper feeding from ADU:

The registration sensor is not turned ON in a fixed period of time after the ADU clutch is turned ON.

↓

Paper jam (E110)

•During paper transporting from ADU:

ADU entrance/exit sensors do not detect the paper at the fixed timing

↓

Paper jam (E510 and E520)

•During paper feeding from the equipment or PFP:

The registration sensor is not turned ON in a fixed period of time after the feed clutch is turned ON.

↓

Paper jam (E220, E310, E320, E340 to E360, E3D0 and E3E0: Error code defers depending on the paper source.)

e-STUDIO3511/4511 GENERAL OPERATION 4 - 10 November 2003 © TOSHIBA TEC