Toshiba 3511, 4511 manual Pickup roller, CLUTCH-6-L

(2)Remove the lever from the holder and take off the separation roller along with its shaft.

(3)Take off the cover, arbor, clutch spring, and then the separation roller from the shaft.

Note: When reassembling the pickup roller, feed roller and separation roller, pay attention to the followings:

1.Set the timing belt securely on the pulleys.

2.Pay attention to the "lock" direction of the one-way clutch.

LOCK

LO

C

CLUTCH-6-L K

		Lever
Holder		Cover
	Arbor	Clutch spring
		Separation roller
	Spring	Shaft
		Arbor
		Spring
		Fig. 10-438

10

Fig. 10-437

3.Fit the clips securely into the groove on the shaft.

4.Confirm that there is no oil staining etc. on the surface of the timing belt, pulleys and rollers.

5.Pay attention to the mounting direction of the rollers.

6.Lubricate the separation roller on every replacement. Refer to the Service Handbook for more details.

(E-4) Pickup roller

(1)Take off the pickup roller from the pickup arm and remove the belt.

Feed roller

Paper

Pickup roller

Separation roller

Fig. 10-439

One-way clutch

Belt

Pickup arm	Pickup roller	Pickup arm
	Fig. 10-440

e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 20 November 2003 © TOSHIBA TEC