Toshiba 4511, 3511 manual Display

5.2.1	Display
No.	Message	State of equipment	Note
1	-	Power is OFF (at Sleep Mode)	Press [START] button or [FUNCTION]
			button to clear
2	Saving energy -	At Energy Saving Mode	Press [START] button to clear
	press START button
3	Wait Warming Up	Scanner warming up	Auto Start can be set
		- Displayed until the equipment becomes
		ready to start scanning
4	Wait Warming Up	Scanner warming up	Press [STOP] button to clear the Auto
	Auto Start	- Displayed when Auto Start is set	Start.
5	WAIT	Displayed when performing the controlling
		function such as cleaning of 2nd transfer
		roller or main charger to keep the equipment
		at the best condition
6	Wait adding toner	Supplying toner	Recovers when the toner supply has
		- Equipment becomes the toner supply state	finished
7	Performing Auto	Displayed at image quality control	Recovers when the image quality
	Calibration		control has finished
8	READY	Ready for copying
		- Waiting for the operation
9	READY	Copying job interrupted	Press [START] button to resume
	Press START button		copying or press [MEMORY CLEAR]
	to copy		button to delete the job
10	READY	Scanner warming up
	(WARMING UP)	- Ready to scan the original
11	READY	Printing out the data
	(PRINTING)	- Scanning is enabled
12	READY	Supplying toner
	(ADDING TONER)	- Scanning is enabled
13	READY	Receiving tray in the equipment is full	- When the bridge unit is installed
	(INNER TRAY FULL)	- Scanning is enabled	- Resumes printing by removing
			papers from the tray
14	READY	No staples in finisher	Cleared by supplying the staples
	(CHECK STAPLER)	- Scanning is enabled
15	READY	Stapling jam occurred in finisher
	(CHECK STAPLER)
16	READY	No staples in saddle stitcher	Cleared by supplying staples
	(CHECK SADDLE	- Scanning is enabled
	STITCH STAPLER)
17	READY	No paper in drawer	Cleared by supplying papers
	(ADD PAPER)	- Scanning is enabled
	Press JOB STATUS
	button
18	READY	Finisher is full of paper	Resumes printing by removing paper
	(FINISHER FULL)	- Scanning is enabled	from the finisher
19	READY	Punching dust box is full	Resumes printing by removing
	(HOLE PUNCH	- Scanning is enabled	punching dust from the dust box
	DUST BIN IS FULL)

5

November 2003 © TOSHIBA TEC 5 - 3 e-STUDIO3511/4511 CONTROL PANEL