Toshiba 3511, 4511 manual Tension plate

(11)Loosen 1 screw, shift the tension plate to the direction of the white arrow, and then fix it at the position where the belt tension is loosened.

Tension plate

Fig. 9-523

9

(12)Remove clip A (back side of the unit), gear A with the shaft and 2 bushings. Remove clip B (back side of the unit), gear B with the shaft, 2 bushings, and gear C between the metal plates of the drive unit.

Clip B

Clip A

(13)Remove 8 screws (denoted with the white arrows are the plastic screws) and take off the plate cover.

Fig. 9-524

Gear B

Gear A

Gear C

Clip B

Fig. 9-525

Plate cover

Fig. 9-526

e-STUDIO3511/4511 DRIVE SYSTEM 9 - 14 November 2003 © TOSHIBA TEC