Toshiba 4511 Drawer feeding unit E-1 Drawer feeding unit, Feed clutch, Separation roller, 0.5mm

[E]Drawer feeding unit (E-1) Drawer feeding unit

(1) Remove the drawer.

(2) Remove 1 screw and take off the drawer feeding unit while sliding it to the front side.

(E-2) Feed clutch

(1)Disconnect 1 connector.

(2)Remove 2 screws and take off the clutch bracket.

(3)Loosen 1 setscrew.

(4)Remove the feed clutch.

Note: Attach the clutch to the shaft referring to the figure at right.

(E-3) Separation roller

(1)Remove 1 screw and take off the separation roller holder.

Fig. 10-433

Feed clutch

Fig. 10-434

0.2-0.5mm

Fig. 10-435

Separation roller

Fig. 10-436

10

November 2003 © TOSHIBA TEC 10 - 19 e-STUDIO3511/4511 PAPER FEEDING SYSTEM