(8) Lift up the equipment and take off the LCF.

2

[D]MJ-1022 (Hanging finisher) <When PFP/LCF is not installed>

(1) Turn OFF the power and unplug the power cable.

(2) Take off the connector cover and disconnect the connector.

(3)Remove 2 screws and take off the safety bracket on the rear side and the cover.

(4)Remove 2 screws and take off the safety bracket on the front side and the cover.

Fig. 2-561

Fig. 2-562

Fig. 2-563

Fig. 2-564

November 2003 © TOSHIBA TEC

2 - 41

e-STUDIO3511/4511 OUTLINE OF THE MACHINE

Page 59
Image 59
Toshiba 4511, 3511 manual Lift up the equipment and take off the LCF, MJ-1022 Hanging finisher When PFP/LCF is not installed