Toshiba 4511, 3511 manual Registration clutch turned on ↓ Approx 1.2 sec, Approx 1.2 seconds

A-2) Bypass misfeeding ( )

• During bypass feeding

Bypass feed clutch is turned ON

↓

Registration sensor is turned ON

*Registration sensor is not turned ON in a fixed period of time (E120)

↓

Bypass misfeeding

↓

Bypass misfeed symbol is displayed ( )

↓

The copying operation is disabled.

↓

Solution: The bypass sensor is turned OFF by removing the paper from the bypass tray.

A-3) Set key copy counter

•When the key copy counter (optional) is pulled out from the equipment which installs it: “Set key

copy counter” displayed.↓

↓

Copying operation disabled

•When the counter is pulled out during copying:

Copying is stopped when the key copy counter is pulled out.

B-1) Misfeed in equipment (	)
• Exit sensor detects jamming of the leading edge
				ON
of paper		Registration clutch
Registration clutch turned ON
						ON
↓ Approx 1.2 sec.*		Exit sensor
Exit sensor turned ON
If the exit sensor is not turned ON after		Timer
		0			Approx 1.2 sec.
approx 1.2 seconds,
↓
					Paper jam (E010)
Paper jam (E010) → The copying operation is
stopped.			Fig. 4-301

4

November 2003 © TOSHIBA TEC 4 - 9 e-STUDIO3511/4511 GENERAL OPERATION