Toshiba 4511, 3511 manual Setscrew

(8) Remove 2 screws and take off the bracket.

(9)Take off the fuser unit ( Chapter 16.7 [A]).

(10)Remove 1 screw and take off the bracket.

(11)Loosen 1 setscrew, disconnect 1 connector and take off the registration clutch.

(12)Remove 2 screws and take off the clutch fixing

cover.

Notes: 1. Make sure not to take off the fixing cover completely. Stand the fixing cover against the equipment being connected with the harness.

2.When the registration clutch is reassembled, assemble by keeping the end of the shaft match with the end of the clutch.

Bracket

Fig. 9-512

Bracket

Fig. 9-513

Setscrew

Registration clutch

Fixing cover

Fig. 9-514

0

Fig. 9-515

9

November 2003 © TOSHIBA TEC 9 - 11 e-STUDIO3511/4511 DRIVE SYSTEM