Toshiba 4511, 3511 manual Drawer feedingD-1 Lower drawer

[D]Drawer feeding(D-1) Lower drawer

•The feed clutch and the transport clutch (high speed) are turned ON, and the pickup roller, feed roller and transport roller are rotated to start feeding paper.

•Passing of the leading edge of the paper turns ON the lower drawer feed sensor, then the transport clutch (high speed) is turned OFF then back ON.

•Passing of the leading edge of the paper turns ON the registration sensor and the paper is aligned by the registration roller.

•The transport clutch (high speed) is turned OFF and the transport roller is stopped.

•The registration clutch and transport clutch (low speed) are turned ON and the paper is transported to the transfer unit.

(D-2) Upper drawer

•The feed clutch and the transport clutch (high speed) are turned ON, and the pickup roller, feed roller and transport roller are rotated to start feeding paper.

•Passing of the leading edge of the paper turns ON the upper drawer feed sensor, then the feed clutch and the transport clutch (high speed) are turned OFF then back ON.

•Passing of the leading edge of the paper turns ON the registration sensor and the paper is aligned by the registration roller.

•The feed clutch and the transport clutch (high speed) is turned OFF and the transport roller is stopped.

•The registration clutch and transport clutch (low speed) are turned ON and the paper is transported to the transfer unit.

10

November 2003 © TOSHIBA TEC 10 - 9 e-STUDIO3511/4511 PAPER FEEDING SYSTEM