Toshiba 4511, 3511 manual Remove 5 screws and take off the bracket

(16) Remove 5 screws and take off the bracket.

Bracket

Fig. 13-719

(17)Remove the stopper attached on the front side of the revolver rotary shaft.

(18)Push in the bearing to the inside of the frame and take it off from the frame.

(19)Slide the revolver to the front and take off the bearing attached on the rear side of revolver rotary shaft from the rear frame. Take off the revolver unit with the bearing.

Note: Do not unscrew the red painted screws

(6 pcs.) on the revolver unit after taking off the revolver unit.

Fig. 13-720

Fig. 13-721

13

Fig. 13-722

November 2003 © TOSHIBA TEC 13 - 13 e-STUDIO3511/4511 REVOLVER UNIT