Toshiba 3511, 4511 manual Bypass pickup solenoid, Bypass paper sensor

(2)Remove 1 clip and pull out the shaft in the direction of the white arrow. Then take off the bypass pickup roller.

(A-5) Bypass pickup solenoid

(1)Remove 4 screws and take off the plate cover by lifting and sliding it to the direction of the white arrow.

10

(2)Disconnect 1 connector and remove 1 spring. Then take off the bypass pickup solenoid.

(A-6) Bypass paper sensor

(1)Disconnect 1 connector. Then release the latches and take off the bypass paper sensor.

Clip	Bypass pickup roller
	Fig. 10-413

Plate spring	Plate cover
	Fig. 10-414

Bypass pickup solenoid

Spring

Connector

Fig. 10-415

Bypass paper sensor

Fig. 10-416

e-STUDIO3511/4511 PAPER FEEDING SYSTEM 10 - 14 November 2003 © TOSHIBA TEC