Toshiba 3511, 4511 manual Transport motor drive unit Connector

9

(13)Loosen 1 setscrew, disconnect 1 connector and take off the upper transport clutch (high

speed) with the gear.

Note: Do not mix up the registration clutch and upper transport clutch (high speed) when installing.

(14)Disconnect 2 connectors and remove 5 screws. Take off the transport motor drive unit.

Setscrew

Upper transport clutch

(High speed)

Fig. 9-516
	Connector
Transport motor drive unit	Connector
Fig. 9-517

(15)Remove 2 screws and take off the transport motor.

(16)Remove 2 screws and take off the bracket, and then take off the upper transport clutch (low speed).

(17)Remove 9 screws and take off the cover of transport gear drive unit.

Bracket

Transport motor

Upper transport clutch (Low speed)

Fig. 9-518

Cover

Fig. 9-519

e-STUDIO3511/4511 DRIVE SYSTEM 9 - 12 November 2003 © TOSHIBA TEC