Toshiba 3511, 4511 manual Flow, Scraper

(3)Disconnect 1 connector and take off the IH control board cooling fan.

[O] Scraper

(1)Take off the fuser unit ( Chapter 16.7 [A]).

(2)Remove 2 screws and take off the jam access cover.

(3) Remove 4 screws and take off the cover.

16

IH control board

cooling fan

Connector

FLOW

Fig. 16-749

Fig. 16-750

Fig. 16-751

(4)Remove 2 screws and take off the scraper. Notes: 1. Before installing or taking off the scraper,

confirm that the pressure releasing levers are up.

2.Be careful not to scratch the fuser belt.

Scraper

Fig. 16-752

e-STUDIO3511/4511 FUSER UNIT/PAPER EXIT SECTION 16 - 28	November 2003 © TOSHIBA TEC
04/01