Toshiba 4511, 3511 manual Ready, To Correct Media Type Press Basic

No.	Message	State of equipment	Note
73	The number of	Displayed when confirming the user to save	Displayed only in Scanning Function
	originals exceeds the	the scanning data as much as stored at
	limits.	memory-full state
	Will you save stored
	originals?
74	Install new Black	No black toner in the cartridge	Displayed when black toner is
	toner cartridge		running out even if other toner still
			remain. Copying not enabled
75	Install new Yellow	No yellow toner in the cartridge	Black copying is available
	toner cartridge		Other button functions are available
76	Install new Magenta	No magenta toner in the cartridge	Black copying is available
	toner cartridge		Other button functions are available
77	Install new Cyan	No cyan toner in the cartridge	Black copying is available
	toner cartridge		Other button functions are available
78	Install new Y and M	No yellow and magenta toner in the	Black copying is available
	toner cartridge	cartridges	Other button functions are available
79	Install new Y and C	No yellow and cyan toner in the cartridges	Black copying is available
	toner cartridge		Other button functions are available
80	Install new M and C	No magenta and cyan toner in the cartridges	Black copying is available
	toner cartridge		Other button functions are available
81	Install new color	Three colors of toner are running out in the	Black copying is available
	toner cartridge	cartridges	Other button functions are available
82	Time for periodic	PM cycle	Maintenance and inspection are
	maintenance	- Displayed at the time for maintenance	performed by qualified service
		- Copying is available	technician.
83	READY	Displays when the printing is stopped
	(CHANGE DRAWER	because of media type mismatch
	TO CORRECT
	MEDIA TYPE)
84	PRESS [BASIC]	Displays the warning that the copy is not
	and select normal	enabled when any drawer but bypass feed is
	paper size	selected at Cover Sheet Mode or Sheet
		Insertion Mode.
85	Misfeed in copier	Paper jam in the equipment	Remove the paper in the equipment
	Press [HELP]	- Displayed when paper jam occurred in the	according to the messages displayed
		equipment	on the panel.
86	Call for service	Displayed when motor, sensor, switch, etc.	Turn OFF the power and solve the
		do not work properly	problem, then turn ON the power.
87	Please try again after	Displayed when the Department Code can	Leave it for a while and key in the
	a while	no be keyed in immediately after power-ON.	code again
88	Set standard size	Displayed when the paper size which is not	Reset the paper size
		acceptable is set (depends on the setting)

5

November 2003 © TOSHIBA TEC 5 - 7 e-STUDIO3511/4511 CONTROL PANEL